Instructions for use: Glowmoon

Glowmoon User Manual

Glowmoon user manual: To have devices always ready to use, simply charge the box for about 1-2 hours per week using the supplied USB cable.

The devices charge automatically when placed in the box, even if it is not plugged in. 

Device application: Choose the adhesive gels according to the area you wish to treat.

1. Thoroughly clean the gels with water and a little mild hand soap.
2. Apply the still-wet gels under the eyes
3. Wait a few seconds; the gels will begin to adhere well. At the same time, wipe away some of the water on the electrode area with a towel and take the opportunity to press the gels firmly onto the skin to ensure they adhere.
4. Turn on the devices and place them using the magnets.

Start-up: Press the white button for 2-3 seconds until the device turns on. Do the same for the second half-moon.


Mode selection: Once switched on, a quick press of the white button allows you to choose between 3 modes:

🔵 Red light + mode EMS gentle 

🔵🔵 Red light + mode Moderate EMS

🔵🔵🔵 Red light + Powerful EMS

Start the session:

For the first 3-4 sessions, use only the gentle EMS mode.  🔵 because the skin needs time to adjust. Use the device on dry skin, without serum, cream or anything else.

⚠️EMS works in waves and causes tingling. but it should never be painful. 

Apply the magnetic devices and relax, enjoy your session. 

One 10-minute session per day is enough to see results quickly. The frequency can be reduced over time to maintain the results.

Adjust the strength and frequency of EMS use according to your skin's sensitivity (never cause pain).

 

Automatic shut-off: Glowmoon™ is designed to automatically turn off after a 10-minute cycle.

Turn off the devices: To turn off the devices before the programmed 10 minutes, press the silver button for 3 seconds.

Interview : Glowmoon™ devices should be cleaned with a damp cloth. Do not rinse or immerse them in water.